NYC Accelerator lowering pollution carbon emission mineral scale
 

NYC made a commitment to reduce greenhouse gas emissions by 80% by 2050 — this projected level by the United Nations is needed to avoid the most dangerous effects of climate change

NYC logo arrows
 
 



hard water softening and descaling technology vulcan small
red video button

HOW can this technology help support NYC 2050 climate mandates?

pdf largeWaslix: Impulse Frequency Mineral Descaler Technology4.42 MB

Mineral scale deposits in building support equipment (cooling towers, heat exchange plates, boilers, water pipes, valves, and other equipment interacting with water) has been shown to increase energy consumption, water demands, lowered equipment and support component part lifecycles. U.S. Department of Energy Report (PNNL-22921) under Contract DE-AC05-76RL01830

Over 40 years of product development across 70 countries has allowed this sophisticated technology to effectively remove existing mineral scale build-up and prevent new hard water scale bonds from forming. Unlike water softening resins, media and other similar water softening processes this proprietary wobbling impulse frequencies tech accelerates a natural occurring phenomenon to dismantle and restructure mineral bonds without affecting water chemistry, as observed with other water softening process, while eliminating mineral scale.

Other than approx. 2 watts of electrical energy, no other consumables are used with this technology to prevent and loosen existing mineral scale; making this technology a truly eco-friendly inclusion tool to lower your building’s carbon footprint.
 



redevelopment

Please excuse our messy website!
We are developing a custom content management function to effectively communicate simple to high involvement products and solutions. Our new software should be ready to implement by April 30, 2024. Go exploring… 
Contact us at 412-848-5058 or info@waslix.com with any questions.


Mineral scale causes an increase in energy loss  Vulcanb descaler cleaner shower water



Contact Waslix (This email address is being protected from spambots. You need JavaScript enabled to view it.  |  412-848-5058) for a comprehensive installation plan for your building.


* Sizing an appropriate mineral descaler model/s is a combination of the building’s primary use, diameter of the water pipes where the mineral descaler will be installed, and the anticipated water flow. Other variables such as building height, square footage and supporting equipment (boilers, heat exchanges, cooling tower, etc.) also play a role in developing a holistic descaling plan to lower energy consumption and extend equipment and piping infrastructure lifespans.

Note: to offer a general mineral descaling model sizing plan for the building classifications below, assumptions were made for pipe diameter, number of floors, building size, etc. A final installation plan for your specific building may require more or fewer installed models.


R0 – Special Condominium
R0 – Special Condominium
(Billing Lot)

Mineral Descaling Models:
10" Main Water Pipe: S350
8" Main Hot Water Pipe: none
4" Secondary Hot Water: S50
(multiple locations- 1 unit per 2-3 levels) 
4" Cooling Tower Pipe: S50
(supply and return lines)

Installation Considerations:
Installing multiple mineral descalers in different parts of the building will help to descale water pipes and other support equipment as water moves in and out building owner equipment and tenant supported appliances. 
• Apartment Building Studies
A1 Two Stories Detached
R1 – Condo Residential Unit
(2-10 Unit Building)

Mineral Descaling Models:
6" Main Water Pipe: S150
4" Main Hot Water Pipe: S100
2" Secondary Pipes: S10
(1 unit per level to support tenant appliances, bathrooms, etc)
4" Cooling Tower Pipe: S50

Installation Considerations:
Placing additional mineral descalers on the secondary water pipe that provides a building level with water will have a stronger descaling benefit.
• Apartment Building Studies
A2 One Story
R2 – Condo Residential Unit
(Walk-Up Building)

Mineral Descaling Models:
2" Main Water Pipe: S25

Installation Considerations:
Assuming this building type is 3 stories tall, accommodating approximately 12 units with a centralized boiler. It would be advantageous to install a stronger mineral descaler for the pipe diameter. This will support all the building equipment (boiler, pumps, etc) and extend descaling benefits to the other tenant units.
• Apartment Building Studies



R3 – Condo: Residential Unit
R3 – Condo: Residential Unit
(1-3 Story Building)

Mineral Descaling Models:
1" Main Water Pipe: V5000

Installation Considerations:
Assuming this type of building is occupied by one family occupying a 1-3 story building. Using the V5000 model will be typical. Installing another model (V3000 or v5000) on the hot water pipe would only show benefit s in helping to keep hot water area cleaner for longer intervals (shower, bathtub, sinks, etc)
• Apartment Building Studies
R4 – Condo: Residential Unit
R4 – Condo: Residential Unit
(Elevator Building)

Mineral Descaling Models:
8" Main Water Pipe: S350 / S500

Installation Considerations:
This installation strategy considers a building type that does not have a centralized boiler to supply condo apartments with hot water. Each condo unit has independent water heaters. One significantly larger mineral descaler is placed on the primary water pipe to descale all basement/ street level equipment, and to create an exceptionally strong descaling benefit for all the pipes throughout the building. Tenants can then choose to install residential models (V3000 or V5000) for their apartment, if required.
• Apartment Building Studies
R5 – Commercial
R5 – Commercial
Miscellaneous

Mineral Descaling Models:
10" Main Water Pipe: S350
8" Secondary Water Pipe: S150
(multiple locations- 1 unit per 2-3 levels)
8" Main Hot Water Pipe: S350
6" Cooling Tower Pipe: S100
4" Chiller Pipe: S100

Installation Considerations:
Attempting to use 1 or 2 larger mineral descalers in a high-rise commercial building to prevent mineral deposit build-up in pipes and support equipment will not produce desired result. It is better to use multiple mineral descaling units in strategic locations. This includes mechanical rooms, near specific equipment and individual units to support 1-3 stories.
• Apartment Building Studies



R6 – Condo: Residential Unit
R6 – Condo: Residential Unit
1-3 Unit Bldg-Orig Class 1

Mineral Descaling Models:
2" Main Water Pipe: S50 

Installation Considerations:
One strong mineral descaler can be used to support this type of residential building.
• Apartment Building Studies
R7 – Condo: Commecial
R7 – Condo: Commecial
1-3 Unit Bldg-Orig Class 1

Mineral Descaling Models:
2" Main Water Pipe: S50

Installation Considerations:
One strong mineral descaler can be used to support this type of building.
• Apartment Building Studies
R8 – Condo: Commercial Unit
R8 – Condo: Commercial Unit
2-10 Unit Bldg.

Mineral Descaling Models:
4" Main Water Pipe: S100

Installation Considerations:
Installing a strong mineral descaler on the main cold water line will support the majority of this building type. Another mineral descale may be necessary to support upper levels (example: 2 inch support water pipes- install: S25 or S50)
• Apartment Building Studies



R9 – Co-Op
R9 – Co-Op
(Within A Condominium)

Mineral Descaling Models:
8" Main Water Pipe: S250
4" Secondary Water Pipe: S100
(multiple locations- 1 unit per 2-3 levels) 
6" Cooling Tower Pipe: S100
4" Chiller Pipe: S100

Installation Considerations:
Due to the high demands for water in residential high-rise buildings, using one large descaler model to pipe diameter solution will not be effective. Positioning a descaler on the main water pipe entering the building and then spreading out smaller descalers to support specific equipment and each building level is a stronger installation strategy. This example also considered that each condo unit has an independent water heater.
• Apartment Building Studies
RA – Cultural, Medical, Educational
RA – Cultural, Medical, Educational, Etc.

Mineral Descaling Models:
4" Main Water Pipe: S100
2" Roof-Top Support Equipment: S10

Installation Considerations:
Additional descalers may be required based on the building’s square footage, height, cooling tower, chillers, heat exchange, etc usage.
• Apartment Building Studies
RB – Office Space
RB – Office Space

Mineral Descaling Models:
8" Main Water Pipe: S250
4" Secondary Water Pipe: S100
(multiple locations- 1 unit per 2-3 levels) 
4" Cooling Tower Pipe: S100
2" Chiller Pipe: S25

Installation Considerations:
This type of building will have commercial and residential water, cooling and heating demands. Instead of trying to support the entire building with 1 or 2 primary descalers; a better installation strategy is to use a combination of smaller and larger mineral descaler models.
• Apartment Building Studies



RG - Building Class
RG - Building Class

Mineral Descaling Models:
10" Main Water Pipe: S350 / S500
(supply and return lines)

Installation Considerations:
This type of building has indoor parking available. If gaining access to secondary pipe lines is not possible due to a pipe lines positioned behind walls and in tight crawl spaces; installing larger descales in the mechanical room supply and return water lines will be necessary.
• Apartment Building Studies
RH - Hotel, Boatel
RH - Hotel, Boatel

Mineral Descaling Models:
8" Main Water Pipe: S250
4" Secondary Water Pipe: S100
(multiple locations- 1 unit per 2-3 levels) 
4" Cooling Tower Pipe: S100
2" Chiller Pipe: S25
4" Main Hot Water Pipe: S100
2" Pool/ Spa: S25

Installation Considerations:
A high-rise hotel installation will mimic the same type of installation strategy as a high-rise apartment building because the water demands are similar.
• Apartment Building Studies
RK - Retail Space
RK - Retail Space

Mineral Descaling Models:
8" Main Water Pipe: S250
4" Secondary Water Pipe: S100
(multiple locations- 1 unit per 2-3 levels) 
4" Cooling Tower Pipe: S100
2" Chiller Pipe: S25
4" Main Hot Water Pipe: S100

Installation Considerations:
If this type of building uses a centralized boiler, installing an additional descaler on the upper half of the high-rise of the hot water pipe would be necessary to extend the descaling benefits in additional hot water piping.
• Apartment Building Studies



RP - Outdoor Parking
RP - Outdoor Parking

Mineral Descaling Models:
8" Main Water Pipe: S250

Installation Considerations:
Depending on the building use will determine an appropriate installation plan.
Example: an office building at a residential / hotel building of the same size. The residential / hotel building will require additional mineral descalers because the water demands are greater.
• Apartment Building Studies
RR - Condo Rentals
RR - Condo Rentals

Mineral Descaling Models:
8" Main Water Pipe: S250
4" Secondary Water Pipe: S100
(multiple locations- 1 unit per level)

Installation Considerations:
Smaller mineral descalers (V3000 or V5000) can be used for each apartment instead of using a larger descaler to support each level.
• Apartment Building Studies
RS - Storage Space
RS - Storage Space
(Non-Business)

Mineral Descaling Models:
4" Main Water Pipe: S50
4" Cooling Tower Pipe: S50

Installation Considerations:
A storage space water demands would be very low. Using a mineral descaler would primarily be used to support specific building equipment (cooling tower, pumps, etc) with possible benefits to support secondary water line (sprinkler systems, toilet facilities, etc)
• Apartment Building Studies



RT - Terraces, Gardens, Cabanas
RT - Terraces, Gardens, Cabanas

Mineral Descaling Models:
¾" Water Pipe: V3000

Installation Considerations:
Supporting mineral descaling efforts localized to terraces, gardens, and cabanas would only require the use of 1 mineral descaler. However, if the building has incorporated our mineral descalers, using an additional descaler to support terraces, gardens, and cabanas areas would be unnecessary.
• Apartment Building Studies
RW - Warehouse, Factory, Industria
RW - Warehouse, Factory, Industrial

Mineral Descaling Models:
6" Main Water Pipe: S150

Installation Considerations:
Depending on the function and purpose for this industrial space using one mineral descaler will be enough to support the space (toilet facilities, general water flow throughout the building, etc)
• Bigard Meat Factory
 


Without knowing the intrinsic specifications for your property classification, the examples above are offered as a possible solution. However, this may not be completely accurate until the above-mentioned variables are considered.
Mineral scale causes an increase in energy loss  Vulcanb descaler cleaner shower water



Contact Waslix (This email address is being protected from spambots. You need JavaScript enabled to view it.  |  412-848-5058) for a comprehensive installation plan for your building.


* Sizing an appropriate mineral descaler model/s is a combination of the building’s primary use, diameter of the water pipes where the mineral descaler will be installed, and the anticipated water flow. Other variables such as building height, square footage and supporting equipment (boilers, heat exchanges, cooling tower, etc.) also play a role in developing a holistic descaling plan to lower energy consumption and extend equipment and piping infrastructure lifespans.

Note: to offer a general mineral descaling model sizing plan for the building classifications below, assumptions were made for pipe diameter, number of floors, building size, etc. A final installation plan for your specific building may require more or fewer installed models.


A0 Cape Cod
D0 - Elevator Co-op Conversion
(from loft/ warehouse)

Mineral Descaling Models:
8" Main Water Pipe: S250
8" Main Hot Water Pipe: S150

Installation Considerations:
Additional smaller descalers models (V3000 or V5000) can also be incorporated into each apartment if individual water heaters are used. This will reenergize the water before it flows into the apartment, offering additional descaling appliance protection, lowering energy consumption and lower cleaning maintenance.   
• Apartment Building Studies
A1 Two Stories Detached
D1 - Elevator Apartment
(Semi-Fireproof Without Stores)

Mineral Descaling Models:
8" Main Water Pipe: S250
8" Main Hot Water Pipe: S150

Installation Considerations:
Additional smaller descalers models (V3000 or V5000) can also be incorporated into each apartment if individual water heaters are used. Alternatively, significantly larger descalers can be used to (S250 / S350) and depending on the square footage of each level, additional descaler can be placed on ever second or third floor to reenergize the water supply.
• Apartment Building Studies
A2 One Story
D2 - Elevator Apartment
Artists in Residence

Mineral Descaling Models:
6" Main Water Pipe: S150
4" Main Hot Water Pipe: S50
4" Cooling Tower Pipe: S50

Installation Considerations:
One or two additional descalers could be placed in upper levels to help ensure adequate long-term descaling benefits.
• Apartment Building Studies



A0 Cape Cod
D3 - Elevator Apartment Fireproof
(Standard Construction Without Stores)

Mineral Descaling Models:
6" Main Water Pipe: S250
4" Main Hot Water Pipe: S100

Installation Considerations:
V3000 desclers could also be installed in each apartment for interested tenants motivated to lower water heater energy consumption, spend less time cleaning bathrooms and protect appliances from corrosion.
• Apartment Building Studies
A0 Cape Cod
D4 - Elevator Cooperatives

Mineral Descaling Models:
6" Main Water Pipe: S250
4" Main Hot Water Pipe: S100
3½" Swimming Pool Pipe: S50
4" Cooling Tower Pipe: S100

Installation Considerations:
Placing additional mineral descalers in strategic locations will not only remove and prevent mineral scaling but also lower energy consumption, and extend the lifespan of vital operating equipment.
• Apartment Building Studies
A0 Cape Cod
D5 - Elevator Apartment Converted

Mineral Descaling Models:
8" Main Water Pipe: S350

Installation Considerations:
Depending how your building operates and your motivation to remove and prevent mineral scaling you may consider using a S350 model (engineered up to a 14 inch water pipe) as a single contact point. Contact us to help you plan the best approach for your building based on your motivation, building equipment and how water is used.
• Apartment Building Studies



A0 Cape Cod
D6 - Elevator Apartment
Fireproof - With Stores

Mineral Descaling Models:
10" Main Water Pipe: S350
4" Secondary Pipes: S50 (multiple)
6" Main Hot Water Pipe: S150
4" Secondary Hot Pipes: S50 (multiple)
4" Cooling Tower Pipe: S50
(supply and return lines)

Installation Considerations:
Considering this type of building has stores on the street level, it would not be necessary to install any additional descalers to support the stores.
• Apartment Building Studies
A0 Cape Cod
D7 - Elevator Apartment
Semi-Fireproof With Storess

Mineral Descaling Models:
10" Main Water Pipe: S350
4" Secondary Pipes: S50 (multiple)
6" Main Hot Water Pipe: S150
4" Secondary Hot Pipes: S50 (multiple)
4" Cooling Tower Pipe: S50
(supply and return lines)

Installation Considerations:
Considering this type of building has stores on the street level, it would not be necessary to install any additional descalers to support the stores.
• Apartment Building Studies
A0 Cape Cod
D8 - Luxury Elevator Apartment

Mineral Descaling Models:
10" Main Water Pipe: S350
4" Secondary Pipes: S50 (multiple)
6" Main Hot Water Pipe: S150
4" Secondary Hot Pipes: S50 (multiple)
4" Pool and Spa: S100
2' Laundry: none- benefit from other descalers
4" Cooling Tower Pipe: S50
(supply and return lines) 

Installation Considerations:
If the motivation is to descale the entire building while maximizing energy loss and lower overall general maintenance and repairs in replacing parts prone to corrosion, filters, and other considerations; then a customized plan would be a better approach. Contact us so we can learn more about your building and needs.  
• Apartment Building Studies



A0 Cape Cod
D9 - Elevator Apartment
(Miscellaneous)

Mineral Descaling Models:
10" Main Water Pipe: S250
4" Secondard Pipes: S50 (multiple)
4" Secondary Hot Water Pipe: S25 (multiple)

Installation Considerations:
Using mineral descaler models with their maximum pipe diameter configurations will still treat and descale your water supply; however, at a slower rate than if a stronger model was used. Taller buildings and properties with a larger square footage will require model with a larger configuration or additional descalers of the same size to ensure complete descaling potential.
• Apartment Building Studies
 
 


Without knowing the intrinsic specifications for your property classification, the examples above are offered as a possible solution. However, this may not be completely accurate until the above-mentioned variables are considered.
Mineral scale causes an increase in energy loss  Vulcanb descaler cleaner shower water



Contact Waslix (This email address is being protected from spambots. You need JavaScript enabled to view it.  |  412-848-5058) for a comprehensive installation plan for your building.


* Sizing an appropriate mineral descaler model/s is a combination of the building’s primary use, diameter of the water pipes where the mineral descaler will be installed, and the anticipated water flow. Other variables such as building height, square footage and supporting equipment (boilers, heat exchanges, cooling tower, etc.) also play a role in developing a holistic descaling plan to lower energy consumption and extend equipment and piping infrastructure lifespans.

Note: to offer a general mineral descaling model sizing plan for the building classifications below, assumptions were made for pipe diameter, number of floors, building size, etc. A final installation plan for your specific building may require more or fewer installed models.


A0 Cape Cod
C0 - Three Families

Mineral Descaling Models:
2" Main Water Pipe: S10

Installation Considerations:
Optional: V3000 or V5000 for individual units on main hot or cold water pipe
• Apartment Building Studies
A1 Two Stories Detached
C1 - Over Six Families
(Without Stores)

Mineral Descaling Models:
4" Main Water Pipe: S100
4" Main Hot Water Pipe: S25

Installation Considerations:
Optional: V3000 or V5000 for individual units on main hot or cold water pipe
• Apartment Building Studies
A2 One Story
C2 - Five to Six Families

Mineral Descaling Models:
4" Main Water Pipe: S100
4" Main Hot Water Pipe: S25

Installation Considerations:
Additional smaller descalers could be used to support other equipment.
• Apartment Building Studies



A0 Cape Cod
C3 - Four Families

Mineral Descaling Models:
4" Main Water Pipe: S50
4" Main Hot Water Pipe: S25

Installation Considerations:
Using stronger descalers will create longer and stronger crystal bonds to remove more mineral scale in less time.
• Apartment Building Studies
A0 Cape Cod
C4 - Old Law Tenementsy

Mineral Descaling Models:
6" Main Water Pipe: S100
4" Main Hot Water Pipe: S150

Installation Considerations:
Additional descaling units may be required on upper levels depending on the size of the building.
• Apartment Building Studies
A0 Cape Cod
C5 - Converted Dwelling
(or rooming house)

Mineral Descaling Models:
1" Main Water Pipe: V5000

Installation Considerations:
If an additional descaler (V3000 or V5000) is placed on the hot water pipe from the water heater, it will cause a stronger descaling effect in showers, bathtubs, sinks, etc becuase the adjusted mineral bonds will be longer and stronger.
• Apartment Building Studies



A0 Cape Cod
C6 - Walk-up Cooperative

Mineral Descaling Models:
6" Main Water Pipe: S250
4" Main Hot Water Pipe: S100

Installation Considerations:
Using stronger descalers on the primary water pipes for the building has the benefit of significantly impacting the water supply as it moves throughout the secondary pipes and into tenant apartments. 
• Apartment Building Studies
A0 Cape Cod
C7 - Walk-up Apartments
(6+ Families With Stores)

Mineral Descaling Models:
8" Main Water Pipe: S250
4" Main Hot Water Pipe: S100
4" Cooling Tower Pipe: S50

Installation Considerations:
Smaller descaler models can be uses to support these estimated pipe sizes and placed in strategic locations instead of using larger models to try to descale the entire building. We can customize an installation plan for your property.
• Apartment Building Studies
A0 Cape Cod
C8 - Walk-up Co-op
(Conversion From Loft/ Warehouse)

Mineral Descaling Models:
4" Main Water Pipe: S50
2" Main Hot Water Pipe: S10

Installation Considerations:
If this type of building is not being used to house multiple family units, additional descalers would not be necessary. 
• Apartment Building Studies



A0 Cape Cod
C9 - Garden Apartments/ Mobile Home Park/ Trailer Park

Mineral Descaling Models:
4" Main Water Pipe: S100
4" Main Hot Water Pipe: S50

Installation Considerations:
Mobile Home/ Trailer Park: V3000 (main water pipe ifor each unit)
• Apartment Building Studies
• Residential Studies
 
 


Without knowing the intrinsic specifications for your property classification, the examples above are offered as a possible solution. However, this may not be completely accurate until the above-mentioned variables are considered.
Mineral scale causes an increase in energy loss  Vulcanb descaler cleaner shower water





B1 - Two Family Brick
B1 - Two Family Brick

Mineral Descaling Models:
1" Main Water Pipe: V5000

Installation Considerations:
If your water pipes are 1 ½ - 2 inches, it would be better to install a stronger descaler (S10) to support this 2 family dwelling.
• Residential Case Studies
B2 - Two Family Frame
B2 - Two Family Frame

Mineral Descaling Models:
1" Main Water Pipe: V5000

Installation Considerations:
If the water supply originates from one main street pipe into the building before being diverted to two separate primary water lines, it would be possible to install one S10 descaler to support these two dwellings.
• Residential Case Studies
B3 - Two Family Converted
B3 - Two Family Converted

Mineral Descaling Models:
1" Main Water Pipe: V5000

Installation Considerations:
Using one descaler to support both properties should be possible if a common water line is being used. An additional V3000 or V5000 deescaler can be used on the hot water pipe to further help descale showers, bathtubs, sinks, dishwashers, washing machines, and other water based appliances using hot water.
• Residential Case Studies



B9 - Miscellaneous Two Family
B9 - Miscellaneous Two Family

Mineral Descaling Models:
¾" Main Water Pipe: V5000

Installation Considerations:
In most situations, it would be possible to use just one V5000 descaler.
• Residential Case Studies
 
 
waslix logo purpose
Our philosophy is to foster a strong association between how clearly clean water will have a healthy biological influence on our bodies and preventative repairs and maintenance to our homes and businesses.
Direct Contact:
Cell: 412-848-5058
Email: Pierre@Waslix.com