Industrial

Please excuse our messy website!

We are in the process of developing custom website software to manage a vast range of simple repeat purchase to high involvement product solutions across water, air, light and energy. Our new software should be ready to implement by mid 2025.
Contact us at 412-848-5058 or info@waslix.com with any questions.

Shop for CuZn related products here with Waslix or on our dedicated CUZN Filter website

Energy Loss and Productivity caused by hard water scale

Contact Waslix (This email address is being protected from spambots. You need JavaScript enabled to view it. | 412-848-5058) for a comprehensive installation plan for your building.

* Sizing an appropriate mineral descaler model/s is a combination of the building’s primary use, diameter of the water pipes where the mineral descaler will be installed, and the anticipated water flow. Other variables such as building height, square footage and supporting equipment (boilers, heat exchanges, cooling tower, etc.) also play a role in developing a holistic descaling plan to lower energy consumption and extend equipment and piping infrastructure lifespans.

Note: to offer a general mineral descaling model sizing plan for the building classifications below, assumptions were made for pipe diameter, number of floors, building size, etc. A final installation plan for your specific building may require more or fewer installed models.

U0 – Utility Company Land And Building

Mineral Descaling Models:
4" Main Water Pipe: S100
2" Main Hot Water Pipe: S10
2" Equipment Pipes: S10

Installation Considerations:
Similar to an office building environment interested in removing mineral scale from building support equipment to decrease their energy demands.

• Energy Efficiency Studies
• Office Buildings

U1 – Bridge, Tunnel, Highway

Mineral Descaling Models:
None

Installation Considerations:
Not applicable

U2 – Gas or Electric Utility

Mineral Descaling Models:
2" Main Water Pipe: V5000
(Administrative offices)

Installation Considerations:
Mineral descaler inclusion would be limited to support water supply in an administrative building.

• Energy Efficiency Studies
• Office Buildings

U4 – Telephone Utility

Mineral Descaling Models:
8" Main Water Pipe: S250
4" Main Hot Water Pipe: S100
4" Cooling Operations: S50

Installation Considerations:
Similar to an office building environment interested in removing mineral scale from building support equipment to decrease their energy demands.

• Energy Efficiency Studies
• Office Buildings

U5 – Communication Facility
Other Than Telephone

Mineral Descaling Models:
4" Main Water Pipe: S50
2" Cooling Operations: S10

Installation Considerations:
Similar to an office building environment interested in removing mineral scale from building support equipment to decrease their energy demands.

• Energy Efficiency Studies
• Office Buildings

U6 – Railroad
Private Ownership

Mineral Descaling Models:
None

Installation Considerations:
Not applicable

U7 – Transportation
Public Ownership

Mineral Descaling Models:
None

Installation Considerations:
Not applicable

U8 – Revocable Consent

Mineral Descaling Models:
Depended on building size and use

Installation Considerations:
Contact us so we can learn more about your building and develop a custom installation plan.

• Energy Efficiency Studies
• Office Buildings

U9 – Miscellaneous Utility Property

Mineral Descaling Models:
Depended on building size and use

Installation Considerations:
Contact us so we can learn more about your building and develop a custom installation plan.

• Energy Efficiency Studies
• Office Buildings

Without knowing the intrinsic specifications for your property classification, the examples above are offered as a possible solution. However, this may not be completely accurate until the above-mentioned variables are considered.

Contact Waslix (This email address is being protected from spambots. You need JavaScript enabled to view it. | 412-848-5058) for a comprehensive installation plan for your building.

* Sizing an appropriate mineral descaler model/s is a combination of the building’s primary use, diameter of the water pipes where the mineral descaler will be installed, and the anticipated water flow. Other variables such as building height, square footage and supporting equipment (boilers, heat exchanges, cooling tower, etc.) also play a role in developing a holistic descaling plan to lower energy consumption and extend equipment and piping infrastructure lifespans.

Note: to offer a general mineral descaling model sizing plan for the building classifications below, assumptions were made for pipe diameter, number of floors, building size, etc. A final installation plan for your specific building may require more or fewer installed models.

T1 - Airports, Air Fields, Terminals

Mineral Descaling Models:
8" Main Water Pipe: S350
(multiple locations)
6" Main Hot Water Pipe: S150
(multiple locations)
4" Cooling Tower Pipes: S100
(multiple locations)
4" Heat Exchanger Pipes: S100
(multiple locations)

Installation Considerations:
Allowing Waslix to develop a customized installation plan will be best approach for a large facility. This will ensure all areas and equipment are included and descaled to lower energy consumption and avoiding unnecessary water blowdowns typically associated with cooling tower operations.

• Energy Efficiency Studies
• Return On Investment

T2 - Piers, Docks, Bulkheads

Mineral Descaling Models:
None

Installation Considerations:
Not applicable

T9 - Miscellaneous

Mineral Descaling Models:
1" Main Water Pipe: V5000

Installation Considerations:
Contact us so we can learn more about your building and develop a custom installation plan.

• Energy Efficiency Studies
• Return On Investment

Without knowing the intrinsic specifications for your property classification, the examples above are offered as a possible solution. However, this may not be completely accurate until the above-mentioned variables are considered.

Mineral scale causes an increase in energy loss

Vulcan mineral descaler factory industrial NYC

Contact Waslix (This email address is being protected from spambots. You need JavaScript enabled to view it. | 412-848-5058) for a comprehensive installation plan for your building.

* Sizing an appropriate mineral descaler model/s is a combination of the building’s primary use, diameter of the water pipes where the mineral descaler will be installed, and the anticipated water flow. Other variables such as building height, square footage and supporting equipment (boilers, heat exchanges, cooling tower, etc.) also play a role in developing a holistic descaling plan to lower energy consumption and extend equipment and piping infrastructure lifespans.

Note: to offer a general mineral descaling model sizing plan for the building classifications below, assumptions were made for pipe diameter, number of floors, building size, etc. A final installation plan for your specific building may require more or fewer installed models.

G0 – Garage
Residential Tax Class 1

Mineral Descaling Models:
None

Installation Considerations:
Not applicable

G1 – All Parking Garages

Mineral Descaling Models:
None

Installation Considerations:
Not applicable

G2 – Auto Body
Collision Or Auto Repair

Mineral Descaling Models:
¾" Main Water Pipe: V5000

Installation Considerations:
The Vulcan 5000 descaler is an excellent choice to descale all the water in this type of building.

• Return On Investment
• Gas Station
• Car Wash

G3 – Gas Station
With Retail Store

Mineral Descaling Models:
¾" Main Water Pipe: V5000

Installation Considerations:
The Vulcan 5000 descaler is an excellent choice to descale all the water in this type of building and will benefit restroom facilities, water filtration equipment and many other water based service equipment.

• Return On Investment
• Gas Station
• Car Wash

G4 – Gas Station
With Service/Auto Repair

Mineral Descaling Models:
¾" Main Water Pipe: V5000

Installation Considerations:
The Vulcan 5000 descaler is an excellent choice to descale all the water in this type of building.

• Return On Investment
• Gas Station
• Car Wash

G5 – Gas Station Only
With/Without Small Kiosk

Mineral Descaling Models:
¾" Main Water Pipe: V5000

Installation Considerations:
The Vulcan 5000 descaler is an excellent choice to descale all the water in this type of building.

• Return On Investment
• Gas Station

G6 – Licensed Parking Lot

Mineral Descaling Models:
None

Installation Considerations:
Not applicable

G7 – Unlicensed Parking Lot

Mineral Descaling Models:
None

Installation Considerations:
Not applicable

G8 – Car Sales/Rental
With Showroom

Mineral Descaling Models:
1" Main Water Pipe: V5000

Installation Considerations:
The Vulcan 5000 descaler is an excellent choice to descale all the water in this type of building.

• Return On Investment
• Car Wash

G9 Miscellaneous

Mineral Descaling Models:
2" Main Water Pipe: S10

Installation Considerations:
The S10 descaler is an excellent choice to descale all the water in this type of building.

• Return On Investment
• Energy Efficiency Studies
• Car Wash

Without knowing the intrinsic specifications for your property classification, the examples above are offered as a possible solution. However, this may not be completely accurate until the above-mentioned variables are considered.

Contact Waslix (This email address is being protected from spambots. You need JavaScript enabled to view it. | 412-848-5058) for a comprehensive installation plan for your building.

* Sizing an appropriate mineral descaler model/s is a combination of the building’s primary use, diameter of the water pipes where the mineral descaler will be installed, and the anticipated water flow. Other variables such as building height, square footage and supporting equipment (boilers, heat exchanges, cooling tower, etc.) also play a role in developing a holistic descaling plan to lower energy consumption and extend equipment and piping infrastructure lifespans.

Note: to offer a general mineral descaling model sizing plan for the building classifications below, assumptions were made for pipe diameter, number of floors, building size, etc. A final installation plan for your specific building may require more or fewer installed models.

F1 - Factory Heavy Manufacturing (Fireproof)

Mineral Descaling Models:
2" Main Water Pipe: S10
(Administrative Offices)
6" Main Water Pipe: S250
(Factory- high water demand)

Installation Considerations:
The primary use for mineral descalers on this building type would be to support specific manufacturing and building support equipment.

• Factory/ Industrial
• Return On Investment

F2 - Factory Special Construction (Fireproof)

Mineral Descaling Models:
2" Main Water Pipe: S10
(Administrative Offices)
6" Main Water Pipe: S250
(Factory- high water demand)

Installation Considerations:
The primary use for mineral descalers on this building type would be to support specific manufacturing and building support equipment.

• Factory/ Industrial
• Return On Investment

F4 - Factory Industrial
(Semi-Fireproof)

Mineral Descaling Models:
2" Main Water Pipe: S10
(Administrative Offices)
6" Main Water Pipe: S250
(Factory- high water demand)

Installation Considerations:
The primary use for mineral descalers on this building type would be to support specific manufacturing and building support equipment.

• Factory/ Industrial
• Return On Investment

F5 - Factory
Light Manufacturing

Mineral Descaling Models:
4" Main Water Pipe: S50

Installation Considerations:
The primary use for mineral descalers on this building type would be to support specific manufacturing and building support equipment.

• Factory/ Industrial
• Return On Investment

F8 - Factory
Tank Farms

Mineral Descaling Models:
2" Main Water Pipe: S10
(Administrative Offices)

Installation Considerations:
Used to descale administrative office water lines including hot water tanks.

• Factory/ Industrial
• Return On Investment

F9 - Factory
Industrial - Miscellaneous

Mineral Descaling Models:
¾" Main Water Pipe: V3000
(Administrative Offices)
2" Main Water Pipe: S10
(Factory- based on water demand)

Installation Considerations:
The primary use for mineral descalers on this building type would be to support specific manufacturing and building support equipment.

• Factory/ Industrial
• Return On Investment

Without knowing the intrinsic specifications for your property classification, the examples above are offered as a possible solution. However, this may not be completely accurate until the above-mentioned variables are considered.

Contact Waslix (This email address is being protected from spambots. You need JavaScript enabled to view it. | 412-848-5058) for a comprehensive installation plan for your building.

* Sizing an appropriate mineral descaler model/s is a combination of the building’s primary use, diameter of the water pipes where the mineral descaler will be installed, and the anticipated water flow. Other variables such as building height, square footage and supporting equipment (boilers, heat exchanges, cooling tower, etc.) also play a role in developing a holistic descaling plan to lower energy consumption and extend equipment and piping infrastructure lifespans.

Note: to offer a general mineral descaling model sizing plan for the building classifications below, assumptions were made for pipe diameter, number of floors, building size, etc. A final installation plan for your specific building may require more or fewer installed models.

E1 - Fireproof Warehouse

Mineral Descaling Models:
4" Main Water Pipe: S50
2" Support Equipment Pipe: S10

Installation Considerations:
The anticipated water demands for a warehouse is expected to be low. If your building is using a higher water demand as part of your industrial process an additional descaler can be used to support your process or a larger descaler can be installed on your primary water line.

• Energy Efficiency Studies

E3 - Semi-Fireproof Warehouse

Mineral Descaling Models:
4" Main Water Pipe: S50
2" Support Equipment Pipe: S10

Installation Considerations:
The anticipated water demands for a warehouse is expected to be low. If your building is using a higher water demand as part of your industrial process an additional descaler can be used to support your process or a larger descaler can be installed on your primary water line.

• Energy Efficiency Studies

E4 - Metal Frame Warehouse

Mineral Descaling Models:
4" Main Water Pipe: S50
2" Support Equipment Pipe: S10

Installation Considerations:
The anticipated water demands for a warehouse is expected to be low. If your building is using a higher water demand as part of your industrial process an additional descaler can be used to support your process or a larger descaler can be installed on your primary water line.

• Energy Efficiency Studies

E7 - Self Storage Warehouse

Mineral Descaling Models:
¾" Main Water Pipe: V5000
2" Support Equipment Pipe: S10

Installation Considerations:
The water demands of a self-storage warehouse would be limited to administrative offices and if a water based cooling system is used to support the facility.

• Energy Efficiency Studies

E9 - Miscellaneous Warehouse

Mineral Descaling Models:
4" Main Water Pipe: S50
2" Support Equipment Pipe: S10

Installation Considerations:
The anticipated water demands for a warehouse is expected to be low. If your building is using a higher water demand as part of your industrial process an additional descaler can be used to support your process or a larger descaler can be installed on your primary water line.

• Energy Efficiency Studies

Without knowing the intrinsic specifications for your property classification, the examples above are offered as a possible solution. However, this may not be completely accurate until the above-mentioned variables are considered.

We make mundane solutions to innovative technology across water, air, light and energy easy to research, decide on and implement.

Direct Contact:

Cell: 412-848-5058
Email: Pierre@Waslix.com

Shop for CuZn related products here with Waslix or on our dedicated CUZN Filter website