Contact Waslix (This email address is being protected from spambots. You need JavaScript enabled to view it. | 412-848-5058) for a comprehensive installation plan for your building.
|
Mineral Descaling Models: |
| Installation Considerations: This building type can be up to 9 stories high and the office environment covers 1 story. The primary descaling purpose would be to support building equipment. Additional descaler can be installed for each level. |
| • Office Buildings • Cooling Towers • Boliers |
|
Mineral Descaling Models: |
| Installation Considerations: The primary descaling purpose would be to support building equipment- typically grouped in a mechanical room. A stronger descaler would be installed on the primary water pip for the building as a centralized treatment location. Additional descaler can be installed on rooftop equipment. |
| • Office Buildings • Cooling Towers • Heat Exchangers |
|
Mineral Descaling Models: |
| Installation Considerations: A standard installation plan is to always install a mineral descaler on the primary water pipe that supplies the building with water. This descales the water before it comes into company with any mechanical components, parts or filters. A primary concern will be to remove and prevent mineral scaling in building support equipment to lower energy costs, extend equipment lifespans and decrease general maintenance. |
| • Office Buildings • Cooling Towers • Heat Exchangers |
|
Mineral Descaling Models: |
| Installation Considerations: The best approach for a building of this use and size would be to support individual equipment. If there is an interest to descale the entire build as part of a holistic energy and sustainability plan to then incorporate multiple mineral descalers instead of relying on one or two very large descalers. |
| • Office Buildings • Return On Investment |
|
Mineral Descaling Models: |
| Installation Considerations: If the building ownership is interested in descaling the entire building it would be better to install multiple descalers. 1-3 larger descalers installed on primary water supply lines could also be used but installing smaller descalers in strategic locations will reenergize the water as it moves through the building (and equipment) creating even long and stronger descaling bonds. |
| • Office Buildings • Cooling Towers • Heat Exchangers |
|
Mineral Descaling Models: |
| Installation Considerations: This installation primary purpose is to support building equipment to lower energy consumption and the wasted water associated with cooling tower blow downs. A secondary descaling benefit will occur over time in general water pipe lines as water circulates from street to upper building levels. |
| • Office Buildings • Cooling Towers • Return On Investment |
|
Mineral Descaling Models: |
| Installation Considerations: Using a stronger mineral descaler on the main cold water pipe line will carry the benefit through hot water tanks/ boilers/ heat exchangers and into the hot water supply for restroom facilities. |
| • Office Buildings • Heat Exchangers |
|
Mineral Descaling Models: |
| Installation Considerations: Installing smaller mineral descalers on the main water pipe entering tenant units will reenergize the water to offer a stronger descaling benefit in water heaters and general appliances. This will help to prevent shortened water heater lifespans caused by mineral scale damage that often results in water tanks bursting and leaking. |
| • Apartment Buildings • Return On Investment |
|
Mineral Descaling Models: |
| Installation Considerations: This type of building can benefit greatly from a holistic mineral descaling plan to help prevent future corrosion and repetitive general maintenance involved with preplacing degraded equipment parts connected to mineral scaling corrosion. |
| • Office Buildings • Return On Investment |
Contact Waslix (This email address is being protected from spambots. You need JavaScript enabled to view it. | 412-848-5058) for a comprehensive installation plan for your building.
|
Mineral Descaling Models: |
| Installation Considerations: Additional mineral descaling models may be required based on the core water based equipment and machinery used to support this building. |
| • Office Buildings • Cooling Towers |
|
Mineral Descaling Models: |
| Installation Considerations: This installation is based on a higher occupancy rate than L1 Loft buildings. Instead of installing 1 significantly larger descaler model to descale the entire building smaller descaler can be positional on primary water pipes to support multiple levels. |
| • Office Buildings • Cooling Towers |
|
Mineral Descaling Models: |
| Installation Considerations: This installation is based on a higher occupancy rate than L1 Loft buildings. Instead of installing 1 significantly larger descaler model to descale the entire building smaller descaler can be positional on primary water pipes to support multiple levels. |
| • Office Buildings • Cooling Towers |
|
Mineral Descaling Models: |
| Installation Considerations: Lofts used as a residential dwelling will have a different installation plan that an office occupied space due to the higher water demands. |
| • Office Buildings • Cooling Towers |
|
Mineral Descaling Models: |
| Installation Considerations: If part of the loft space I being used by a health club/ gym, a stronger descaler can be used on the primary hot water pipe. This will significantly help to keep showering and change room facilities cleaner with less effort. |
| • Office Buildings • Cooling Towers |
Contact Waslix (This email address is being protected from spambots. You need JavaScript enabled to view it. | 412-848-5058) for a comprehensive installation plan for your building.
|
Mineral Descaling Models: |
| Installation Considerations: If your building occupies a large square footage on one level and you are interested in descaling all the piping you may require an additional descaler. A dedicated descaler can also be used to support heating and cooling equipment. |
| • Shopping Center/ Stores |
|
Mineral Descaling Models: |
| Installation Considerations: Installing additional mineral descalers may be necessary to maximize the efficiencies of your equipment (cooling tower units, pumps, heat exchanges, etc) based on the total size and stories of your building. Contact us for a customized plan. |
| • Shopping Center/ Stores • Cooling Towers |
|
Mineral Descaling Models: |
| Installation Considerations: The predominant water usage will be used in water supply to bathroom facilities, sprinkler systems, building cooling operations, etc. Unlike apartment or hotel building of equal size, installing multiple descalers to compensate for higher water demands is not necessary in a multi-story department type of building. |
| • Shopping Mall |
|
Mineral Descaling Models: |
| Installation Considerations: Varying water demands are expected. Installing a significantly larger mineral descaler on the main water pipe entering the building will ensure core water based mechanical equipment is thoroughly descaled before the water supply is pushed to upper levels. Depending on the size and function of the building additional mineral descaler may be necessary on various levels to recharge the water supply. |
| • Shopping Center/ Stores • Cooling Towers |
|
Mineral Descaling Models: |
| Installation Considerations: The Vulcan 5000 model is robust solution for this type of property and can effectively treat water flowing at up to 35 GPM. One descaler installed on a main water line can support water pipes, commercial dishwashers, toilet facilities, grease traps, etc |
| • Food Service Industry • Wolfies Waterfront Grill |
|
Mineral Descaling Models: |
| Installation Considerations: Shopping center locations are typically shorter buildings with larger square foot size per story. Descaling all the water pipes through the building will benefit more from slightly stronger descaling units positioned in several pipe locations. Additional mineral descaler/s will be incorporated into the cooling network of the property. This will lower energy demands, lower cooling tower blowdowns, reduced water waste, lowered maintenance checks and all other associated labor requirements. |
| • Shopping Mall |
|
Mineral Descaling Models: |
| Installation Considerations: Similar to an office based environment maimed at reducing energy demands in building support equipment and descaling general water pipes and pumps to extend the operating lifespan of equipment and prevent corrosion. |
| • Office Buildings • Boliers |
|
Mineral Descaling Models: |
| Installation Considerations: Contact us to help you choose the best installation plan for your building. |
| • Shopping Center/ Stores • Boliers • Cooling Towers |
Contact Waslix (This email address is being protected from spambots. You need JavaScript enabled to view it. | 412-848-5058) for a comprehensive installation plan for your building.
|
Mineral Descaling Models: |
| Installation Considerations: Cooling Towers: a descaler on the return line near the rooftop cooling stack and another on the supply line near the chiller. Additional descalers may be required on primary cold water lines to ensure adequate descaling on upper levels. |
| • Hotel Case Studies • Angsana Xi'an Lintong • Barcelo Hotel Group |
|
Mineral Descaling Models: |
| Installation Considerations: Additional descalers may be required on primary cold water lines to ensure adequate descaling on upper levels. Descalers can be included in other functions and facilities of the hotel such as the kitchen, pool to lower general cleaning intervals, and before water filtration and UV equipment. |
| • Hotel Case Studies • Comfort Inn and Suites • Barcelo Hotel Group |
|
Mineral Descaling Models: |
| Installation Considerations: Additional descalers may be required on primary cold water lines to ensure adequate descaling on upper levels. Descalers can be included in other functions and facilities of the hotel such as the kitchen, pool to lower general cleaning intervals, and before water filtration and UV equipment. |
| • Hotel Case Studies • Comfort Inn and Suites • Barcelo Hotel Group |
|
Mineral Descaling Models: |
| Installation Considerations: An additional descaler can also be used to provide additional support to the onsite laundry facilities to extend the lifespan of commercial equipment. Pilbara Commercial Laundry Service case study saves $10,000+ every 2 years. |
| • Hotel Case Studies • Comfort Inn and Suites • Habitat Suites |
|
Mineral Descaling Models: |
| Installation Considerations: Mineral descalers are spread out throughout the hotel to continuously reenergize the water supply in strategic locations. This will dramatically lower general maintenance and cleaning by the hotel maintenance staff. |
| • Hotel Case Studies • Palm Beach Club Hammamet • Holiday Resort Lombok |
|
Mineral Descaling Models: |
| Installation Considerations: Additional descalers may be required on primary cold water lines to ensure adequate descaling on upper levels. Descalers can be included in other functions and facilities of the hotel such as the kitchen, pool to lower general cleaning intervals, and before water filtration and UV equipment. |
| • Hotel Case Studies • Comfort Inn and Suites • 30 Year Old Apartment |
|
Mineral Descaling Models: |
| Installation Considerations: Additional descalers may be required on primary cold water lines to ensure adequate descaling on upper levels. Descalers can be included in other functions and facilities of the hotel such as the kitchen, pool to lower general cleaning intervals, and before water filtration and UV equipment. Owners of individual units can use the V5000 model on the apartment’s main water pipe. This 30 year old apartment owner notices improvements within 1 hour. |
| • Hotel Case Studies • Comfort Inn and Suites • Barcelo Hotel Group |
|
Mineral Descaling Models: |
| Installation Considerations: If access to primary water lines and available power outlets is restricted in narrow crawl spaces it would be better to install a significantly larger model (example: S350 / S500) on basement water pipes to support the dormitory building. |
| • Hotel Case Studies • Comfort Inn and Suites • Underground Installation |
|
Mineral Descaling Models: |
| Installation Considerations: This installation approach uses a descaler for a 20” max pipe diameter on a 10” water pipe. The building’s water control equipment and pumps are location on street/ basement level. The additional descaling strength will be required to reach upper levels of the hotel. |
| • Hotel Case Studies • Royalton Punta Cana Resort & Casino |
|
Mineral Descaling Models: |
| Installation Considerations: Additional descalers may be required on primary cold water lines to ensure adequate descaling on upper levels. Descalers can be included in other functions and facilities of the hotel such as the kitchen, pool to lower general cleaning intervals, and before water filtration and UV equipment. |
| • Hotel Case Studies • Comfort Inn and Suites • Barcelo Hotel Group |
|
Mineral Descaling Models: |
| Installation Considerations: The motivation for this type of building may be to prevent mineral scaling in boiler equipment and to minimize general cleaning in shared bathroom facilities. If this is a larger building with several floors, ownership may want to consider using additional mineral descalers on primary hot water pipes on higher levels. This will recharge the water as it approaches upper levels to help lower the time and effort s required to keep showering facilities clean. |
| • Hotel Case Studies • Comfort Inn and Suites • An Inn in Tibet |
|
Mineral Descaling Models: |
| Installation Considerations: Although the main water pipes may be 6 inch diameters; using a stronger centralized descaler may be adequate to offer a descaling solution for this type of building (depending on total size) without having to use additional descalers in various parts of the building. This type of installation plan may be centered around providing a simple long-term descaling solution with minimal overall investment. |
| • Hotel Case Studies • Apartment in China • Apartment in France |
|
Mineral Descaling Models: |
| Installation Considerations: If this is a high raised style building, it will be necessary to install a significantly larger descaler on the main water pipe if the intention is to support upper levels without using additional support models. This type of building may want to maximize descaling efforts throughout the building to create a holistic energy saving plan, maximize the lifespan of support equipment and lower general cleaning cycles. |
| • Hotel Case Studies • Comfort Inn and Suites • Guanfang Hotel • Ralons Lavanderia Laundry Services |
